SD card not showing up on your Mac? Here's how to fix it
THE SHORT ANSWER
Most “SD card not showing up” cases come down to the card reader, the port, the card’s lock switch, or Finder hiding external disks, not a dead card. Start by sliding the lock switch fully up and trying a different reader and port. If the card still isn’t in Finder, open Disk Utility, choose View › Show All Devices and click Mount.
When an SD card doesn’t appear on a Mac, it feels like the photos are gone. Usually they aren’t. The card is fine and something between it and the Mac is not: the lock switch, the reader, a hub, a Finder setting, or a volume that simply isn’t mounted. The fixes below go from the most likely and harmless to the last resort. None of them writes to the card.
First: is it the card, the reader or the Mac?
Three quick checks tell you where to look, so you don’t try everything.
- Does another card show up in the same reader or slot? If yes, the reader is fine and this card is the problem. If no, suspect the reader, the port or the Mac.
- Does this card show up in another reader or on another computer? If yes, the card is fine and your reader or Mac is the problem.
- Does it appear in Disk Utility with Show All Devices on? (Fix 5 below.) If it appears there, the Mac sees the card and the issue is mounting or Finder, which is fixable. If it appears nowhere, including System Information, the Mac isn’t detecting the hardware at all.
Whatever you find, start at Fix 1. They take seconds each.
The fixes, in order of likelihood
Fix 1: Check the lock switch
Full-size SD cards and microSD-to-SD adapters have a small slider on the left edge. Pushed toward “LOCK” it makes the card read-only, and a cracked or half-stuck slider can stop a card mounting properly. Slide it fully up toward the contacts, then take the card out and put it back in. A broken switch on an adapter is a very common, easily missed cause.
Fix 2: Reseat the card and try another reader or port
Take the card out, look at the gold contacts for dirt, and push it back until it seats fully. Then change one thing at a time: a different USB port, a different card reader, the Mac’s built-in slot if it has one. Restart the Mac if nothing changes, and try again. Cheap readers and adapters fail quietly, so a second reader is the single most useful test.
Fix 3: Take hubs and dongles out of the chain
Plug the reader straight into the Mac. A USB-C hub or dongle adds one more thing that can fail to power or pass through a card reader.
On a MacBook with Apple silicon running macOS Ventura or later, macOS can ask whether to allow a new accessory to connect: if you see “Allow accessory to connect”, click Allow. This step doesn’t apply to Intel Macs or older versions of macOS. You can review the setting in System Settings › Privacy & Security › Allow accessories to connect.
Fix 4: Make Finder show external disks
A mounted card can be invisible just because Finder is told to hide it.
- In Finder, choose Finder › Settings from the menu bar.
- On the General tab, tick External disks under “Show these items on the desktop”.
- On the Sidebar tab, tick External disks under “Show these items in the sidebar”.
Take the card out and put it back in, then check the desktop and the Finder sidebar. If it appears, copy your photos off and you’re done.
Fix 5: Show all devices in Disk Utility
Open Disk Utility (Applications › Utilities), then choose View › Show All Devices. This lists the physical card as well as the volumes on it, which matters when a volume has no name or won’t mount on its own.
If the card is listed here, the Mac can see it, and you can almost always get further. If it isn’t listed in Disk Utility or in System Information (under USB or Card Reader), the problem is hardware: go back to Fixes 1 to 3, then jump to Fix 9.
Fix 6: Mount the volume
Select the card’s volume in the Disk Utility sidebar. If it’s greyed out, click Mount in the toolbar. A successful mount usually makes it show up in Finder immediately.
Fix 7: Run First Aid
If Mount fails, select the volume and click First Aid, then Run. First Aid checks the volume for file-system errors and can repair small directory problems so the card mounts. It doesn’t erase anything, which is why it comes before any thought of formatting.
Never format it to make it work if your photos aren’t backed up.
Erase, Partition and Restore in Disk Utility make the card usable again by wiping its file list, and the Initialize button in the “disk not readable” dialog opens Disk Utility so you can do exactly that. That puts the photos at risk. Use only Mount and First Aid until you’ve copied what you need.
Fix 8: The card shows in Disk Utility but won’t mount
If the card is listed, but Mount fails and First Aid can’t fix it, the file system is damaged, not necessarily the photos. Don’t format it. If macOS pops up “The disk you attached was not readable by this computer”, click Ignore. Our guide to that dialog explains each button and what Initialize does: disk not readable on Mac: what it means and how to fix it. Then skip ahead to the section below on getting the photos off.
Fix 9: Test the card in a camera or another computer
If nothing above makes the card appear, confirm whether the card itself is the problem. Put it back in the camera and see whether the camera can play back the photos, or try it in another Mac or a PC. If it works there, the fault is your reader or your Mac. If it fails everywhere, the card or its controller has probably failed, and no app can read a card the computer can’t detect.
The card shows up, but your photos are gone?
Sometimes the card finally appears and it’s empty, or it shows up as needing formatting. That doesn’t always mean the photos are gone: deleting files or formatting a card usually removes the list of files, not the photos themselves, until new data is written over them. Stop using the card and don’t format it again.
A recovery app can read the card directly, even when the Mac won’t mount it. Shotback is a Mac app that reads the card read-only, so scanning can’t change it, and it can scan a card that won’t mount or says it needs formatting. The scan and preview are free, so you can see what it finds before you pay anything. It also refuses to save recovered files back onto the card you’re recovering from, so choose a folder on a different drive.
If the card was formatted, or you erased it after clicking Initialize, recovering photos after formatting an SD card covers what is still possible. For files you deleted, recovering deleted photos from an SD card on Mac walks through the whole process.
If it doesn’t show up anywhere
If the card doesn’t appear in Finder, Disk Utility or System Information, after you’ve tried a different reader, adapter and port, the card or its controller has most likely failed. Stop experimenting, because repeated attempts can make things worse. If the photos are irreplaceable, consider a professional data-recovery lab, which can work at a hardware level that software can’t reach.
Frequently asked questions
Why is my MacBook not detecting my SD card?
Most of the time it is the reader, the port or the card's lock switch, not the card itself. Check that the lock slider is pushed fully toward the contacts, push the card in until it seats, then try a different reader and a different port without any hub in between. If the Mac still shows nothing in Disk Utility with Show All Devices turned on, test the card in a camera or another computer.
Why does my memory card show in Disk Utility but not in Finder?
The card is detected but its volume isn't mounted, or Finder is set to hide external disks. In Finder, open Finder › Settings and tick External disks under General and Sidebar. Then in Disk Utility select the card's volume and click Mount. If Mount fails, run First Aid. A card that appears in Disk Utility but won't mount usually still holds its photos.
Why is my SD card reader not showing up on my Mac?
Check System Information (hold Option, choose Apple menu › System Information) under USB or Card Reader. If the reader isn't listed, try another port, remove any hub or dongle, and try a different reader. On a MacBook with Apple silicon running macOS Ventura or later, approve any "Allow accessory to connect" prompt. If a second reader works, the first one is faulty.
Should I format the SD card if my Mac won't read it?
Not if the photos aren't backed up. Formatting makes the card usable again but erases its file list, which puts the photos at risk. Click Ignore on the "not readable" dialog, not Initialize or Erase, and try Mount and First Aid first.
Can I get photos off an SD card my Mac can't read?
Often yes, as long as the Mac can see the card as a device. A read-only recovery scan can read a card that won't mount or says it needs formatting, without trusting its damaged file system. Shotback does this and the scan and preview are free. If the Mac can't see the card at all, no software can help.